Apple QuickTake 200 Camera Instruções de Operação descarregar pdf (Página 9)

Formatting the storage card

1 Turn on the camera by sliding the power switch (

‰

) (above the LCD screen) in the

direction indicated by the arrow and then releasing it.

2 To format the storage card, turn the mode dial to Erase (

) mode.

3 Use the plus (+) and minus (–) buttons (next to the mode dial) to select

FORMAT

the screen.

4Press the action button (next to the + and – buttons).

OK? appears blinking on your screen.

5Press the action button again to format the card.

Write-protecting the storage card

To prevent erasing important data from your storage card, place a write-

protect seal over the write-protect circle on the card. You receive 4 seals with

every card you buy. (You cannot reuse seals.)

This seal makes it impossible to record data to or erase data from the card.

To aga i n use the card to record or erase data, remove the seal.

IMPORTANT

Write-protection might not function if the seal becomes dirty. Use

a dry, lint-free cloth to wipe the seal clean.

WARNING

When you format a card, all the data on the card is removed,

including any protected images.

Getting Started With the QuickTake 200 Camera

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 97 98

Sem comentários

Apple QuickTake 200 Camera Instruções de Operação Página 9