Apple PC Serial and Parallel Card Manual do Utilizador descarregar pdf (Página 47)

Preparing the slots

7 Remove the metal port access covers for the slots you need.

If you are installing the PC Serial and Parallel Card at the same time you are

installing a PC Compatibility Card, pull out the port access cover behind the

expansion slot closest to the center of the computer. Then pull out the port

access cover behind the second PCI expansion slot.

If you already have a PC Compatibility Card installed in your computer, leave

it in place and pull out the port access cover behind the second PCI

expansion slot.

8If you have a card in the third PCI expansion slot, remove it.

You will have more room to install your PC Serial and Parallel Card if the

third slot is empty. See the user’s manual that came with the card for

instructions on how to remove it.

Press apart the two

levers next to the

card access port to

release the access

port cover.

Second PCI slot PC Compatibility CardSlide the port access cover out

and away from the access port.

Installing the Card in a Power Macintosh 8500 or 9500

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Sem comentários

Apple PC Serial and Parallel Card Manual do Utilizador Página 47