Apple Setting Up Your Power Macintosh G4 (PCI & AGP) Manual do Utilizador descarregar pdf (Página 48)

48 Chapter 2

10 If you have installed two or more SCSI drives, tape the SCSI data cable to the top of the

drives in positions 1 and 2.

11 If you are ﬁnished installing items in your computer, skip ahead to “Closing the Computer”

on page 53. If you want to install other items, go to the relevant section.

If you’re installing a SCSI drive in drive position 1 or 2, put the ribbon cable on top

of the drives. You can tape the ribbon cable to the tops of the drives with double-stick

foam tape to make the cable lie flat.

PCI SCSI card

The ribbon cable may attach to a different position on

the PCI SCSI card, depending on which card you have.

To install Go to the section

PCI expansion card “Installing a PCI Expansion Card” on page 49

New battery “Replacing the Battery” on page 52

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 61 62

Sem comentários

Apple Setting Up Your Power Macintosh G4 (PCI & AGP) Manual do Utilizador Página 48