Apple Xserve G5 Manual do Utilizador descarregar pdf (Página 72)

70 - Xserve G5 Take Apart

Logic Board

6. Using a Phillips screwdriver, release the thumbscrew that secures the logic board to

the chassis (indicated by a triangle in the illustration below).

Note: The thumbscrew is captive; you cannot remove it.

7. Grasping the logic board by its long edges, move it forward and up slightly to release it

from the four mounting pegs (indicated by squares in the illustration below).

Caution: Be careful not to ﬂex the logic board, which could damage the board or its

components. To minimize ﬂexing, always grasp the logic board by its long edges when

removing or installing it.

8. Grasping the long edges of the logic board, tilt up the front end of the logic board so

that the board ports clear the openings in the back of the enclosure.

9. Grasp the logic board by its long edges and remove it from the server. Make sure the

board clears the two chassis release levers.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 93 94

Sem comentários

Apple Xserve G5 Manual do Utilizador Página 72