Page 26 of 51
Copyright © 2004 Powerbookmedic.com.
All rights reserved.
Back Casing Removal
Before proceeding, you must first remove:
Display Module
With the display removed, begin by removing the two Torx T6 screws from both sides of
the display. (You should remove a total of 4 screws, two from each side)
Next, you will need to
pry the back panel
(case with Apple logo
) off. It is best to start
at a corner as shown,
and pull the casing in
the opposite direction
as the LCD. You may
need to use a flat too
to help you at first.
After you get started,
the casing will come
off easily.
Comentários a estes Manuais