PowerBook (FireWire) Memory (RAM) Replacement Instructions Be sure to follow these instructions carefully. Failure to follow these instructions
PowerBook (FireWire) Memory (RAM) - 10 5 Insert the new DIMM. Warning: When removing or installing the RAM card, do not touch its connectors. Hand
PowerBook (FireWire) Memory (RAM) - 11 7 Press down very firmly against the processor module until you feel it securely attach to the connector on
PowerBook (FireWire) Memory (RAM) - 12 Closing the Computer 1 After replacing RAM in the upper or lower RAM slot, insert the internal heat shield.
PowerBook (FireWire) Memory (RAM) - 13 4 Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on
PowerBook (FireWire) Memory (RAM) - 14 Apple Computer, Inc. © 2000 Apple Computer, Inc. All rights reserved.Under the copyright laws, this docum
2 - PowerBook (FireWire) Memory (RAM) About Memory Your computer comes with a minimum of 64 megabytes (MB) of synchronous dynamic random-access mem
PowerBook (FireWire) Memory (RAM) - 3 Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal
4 - PowerBook (FireWire) Memory (RAM) 3 Make sure that the keyboard locking screw is not in the locked position. Your new PowerBook comes with the k
PowerBook (FireWire) Memory (RAM) - 5 5 Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far e
6 - PowerBook (FireWire) Memory (RAM) 8 With a Phillips screwdriver, remove the screws that secure the internal heat shield. . 9 Lift up the interna
PowerBook (FireWire) Memory (RAM) - 7 Replacing RAM in the Upper RAM Slot 1 After opening the computer (removing the keyboard and heat shield), re
PowerBook (FireWire) Memory (RAM) - 8 2 Hold the replacement RAM expansion card at a 30-degree angle. Line up the notch in the card with the small
PowerBook (FireWire) Memory (RAM) - 9 Replacing RAM in the Lower RAM Slot 1 After opening the computer (removing the keyboard and heat shield), re
Comentários a estes Manuais