Apple iMac (Flat Panel Especificações descarregar pdf (Página 14)

iMac (17-inch Flat Panel, 1GHz) Take Apart -

Procedure

1. When opening the bottom housing, rotate the base so the optical drive door is on the

right. (This position is less stressful on the internal cables when the bottom is open).

2. Remove the four torx screws.

Replacement Note:

These torx screws must be tightened to at least 17 in.-lbs. If you do

not have a torque driver, you will have to make sure these screws are tightened by hand

FIRMLY, BUT NOT FORCIBLY. Or, purchase the service tool (076-0899) in order to ensure

the thermal pipe is ﬁrmly mated with the top base. If the bottom housing is not securely

attached to the base in this fashion, the CPU may overheat and become damaged. For

more information, refer to “Thermal Paste Application’” in this chapter. Rotate the base so

that the optical drive door is on the right.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 155 156

Sem comentários

Apple iMac (Flat Panel Especificações Página 14