
m SMTP host
m IP address information
If your configuration uses a DHCP server, you’ll need the domain name.
If your configuration is manual, you’ll need the local IP address, subnet mask,
gateway/router address, DNS/Name server address, and the domain name.
More on requirements
Read this section for detailed information about the above requirements.
Internet e-mail software
To send and receive e-mail, you need to have Internet e-mail software installed on
your Newton device. If your e-mail software isn’t installed, use connection software,
such as the Newton Connection Utilities, to install it. For more information, see the
documentation that came with your e-mail software or the connection software.
A compatible external modem (cellular or PC card)
There are a number of modems that you can use with Newton devices. For the latest
information, go to the Modems for Newton OS Computers page on the World Wide
Web at http://www.newton.apple.com/product_info/thirdparty/modemintro.html.
Note: The modem information provided by Apple does not constitute a
recommendation or endorsement. Contact your dealer or modem manufacturer
for more information. Apple User Assistance does not have modem information.
Manufacturers modify their modems on a regular basis. The modems listed on
the Modems for Newton OS Computers page were tested for compatibility and
operated correctly; however, changes in the modems may have introduced some
incompatibilities. Apple attempts to keep its modem list up-to-date, but is often
unaware of changes until they appear in the market. Apple is not responsible for
the proper operation of any manufacturer’s modem with Newton devices.
Important Most modem PC cards require a lot of power, so using them will
shorten the life of batteries. When using a modem PC card, it is best to use the NiMH
Rechargeable Battery Pack or plug in the optional AC adapter.
4
Comentários a estes Manuais