Apple 073-0562 Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para não Apple 073-0562. Apple 073-0562 User's Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 6
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
073-0562 Rev. E
Power Mac G4 / Macintosh Server G4
Video Card
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions
could result in damage to your equipment and may void your warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
Phillips screwdriver
Pliers
Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its
internal components.
1. Place your computer on a clean, flat surface.
2. If you think your computer is in sleep, press the power button on the front of the
computer to wake it.
3. Shut down your computer by opening the Special menu and choosing Shut Down.
Then wait five minutes for the computer’s internal components to cool down.
4. If you attached a security cable through the computer’s lockable cover latch, remove
the cable.
5. Unplug all other cables from the computer except the power cord.
6. Touch the metal PCI access covers on the back of the computer.
(Figure 1A)
Important:
To avoid electrostatic discharge, always ground yourself by touching the
port access covers before you touch any parts or install any components inside the
computer. To avoid static electricity building back up in your body, do not walk
around the room until you have completed your installation and closed the computer.
7. Unplug the power cord.
Vista de página 0
1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - Video Card

073-0562 Rev. E Power Mac G4 / Macintosh Server G4 Video Card Replacement Instructions Be sure to follow the instructions in this sheet carefully

Página 2 - Removing the Installed Card

Power Mac G4 Video Card - 2 8. Lift the latch on the right side access panel. (Figure 1B) 9. Gently lower the access panel until it lies flat. To av

Página 3 - Closing the Computer

Power Mac G4 Video Card - 3 • Pull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors

Página 4 - Power Mac G4 Video Card

Power Mac G4 Video Card - 4 12AB

Página 5

Power Mac G4 Video Card - 5 34AGP slotABC

Página 6

Power Mac G4 Video Card - 6 5CABB

Comentários a estes Manuais

Sem comentários