Apple Workgroup Server 8550 Manual do Utilizador descarregar pdf (Página 53)

On the internal/external bus, you can use SCSI ID numbers 0, 4, 5, 6. The

secondary hard disk (in the top bay of the internal disk drive bracket), the

optional built-in DAT drive (or any other drive in your server’s auxiliary bay),

and the built-in CD-ROM drive reserve SCSI IDs 1, 2, and 3, respectively, on

the internal/external bus. If you do not have a secondary hard disk in the

internal disk drive bracket, you can also use SCSI ID 1 for this bus; if you do

not have a DAT or other drive in the auxiliary bay, you can use SCSI ID 2 on

this bus.

3 Locate the ID number switch on the back of your SCSI device.

4 Push the ID switch repeatedly until the number you want appears.

On some SCSI devices, the ID number switch is inside a small hole. Insert a

straightened paper clip to push the switch.

Follow the instructions in the next section to install an additional hard disk in

the internal disk drive bracket. To replace or install a drive in the server’s

auxiliary bay, see “Installing a Drive in the Auxiliary Bay.” To connect

external devices to your server, see “Connecting an External SCSI Device.”

SCSI ID switch

44 Chapter 3 / Expanding Your Server and Connecting Other Equipment

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 120 121

Sem comentários

Apple Workgroup Server 8550 Manual do Utilizador Página 53