Apple 9000-INT Especificações descarregar pdf (Página 59)

5 Printing 59

Printing envelopes

To print envelopes from a program

1 Load envelopes into Tray 1.

2 In your program or in the driver, specify Tray 1 or Automatic. Or, select the paper source.

3 Set the appropriate envelope size and type. For envelope specifications, see the introduce guide on the product CD, or go

to www.hp.com/support/lj9000

4 If your program does not automatically format an envelope, specify “Portrait” for page orientation.

CAUTION To avoid a jam, do not remove or insert an envelope after you begin printing.

5 Set margins to within 15 mm (0.6 inch) from the edge of the envelope. For best print quality, set margins for a return and

mailing address (typical address margins for a Commercial #10 or DL envelope are offered). Avoid printing over the area

where the three back flaps meet on the back of an envelope.

6 To print by type and size of paper, see the introduce guide on the product CD, or go to www.hp.com/support/lj9000

7 Select the Bin 1 as the output location, if you print envelopes to the stacker or stapler/stacker. If you print envelopes to

the multifunction finisher, select the Stacker bin as the output location.

8 When finished, return the fuser levers to the down position.

CAUTION Failure to return levers to the down position for standard paper types can result in poor print quality.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 277 278

Sem comentários

Apple 9000-INT Especificações Página 59