Apple Xserve Guia do Utilizador descarregar pdf (Página 18)

16 -

Xserve G5 Take Apart

RAID Card and Standoff

3. Turn the card over and disconnect the three RAID card cables.

Replacement Note:

Before installing the RAID card in the PCI riser, do the following:

1) Plug the backup battery cable into the connector on the card. 2) Connect the three

RAID card cables to card connectors as illustrated below:

• To port 0 (nearest the fence), connect cable A (longest, may be blue-banded)

• To port 1 (second from fence), connect cable B (middle-length, may be red-banded)

• To port 2 (third from fence), connect cable C (shortest, may be white-banded).

Important:

Do not connect any cable to Port 3 on the RAID card.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 94 95

Sem comentários

Apple Xserve Guia do Utilizador Página 18