Apple Xserve Intel (Late 2006) DIY Procedure for Heatsin Manual do Utilizador

 Xserve (Late 2006)073-1096 Rev. AProcessor Heat SinkReplacement InstructionsFollow the instructions in this document carefully. Failure to follow th

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 10Replacing the Airow DuctLower the airow duct into position on the logic board. No

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 11Closing the XserveReplace and secure the cover.Slide the Xserve back into the rack,

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 2Warning: Always shut down the Xserve before opening it to avoid damaging its interna

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 3Opening the XserveLoosen the thumbscrews at the back of the top cover and slide the

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 4Caution: Try not to completely remove the screws from the airow duct. Tiny black ru

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 5Important: Each heat sink is connected to the logic board by a small 2-pin thermal s

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 6Installing the Replacement Processor Heat SinkNote: The thermal bond between the pro

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 7Clean o any existing thermal grease on the top face of the processor using the alco

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 8Use the edge of the package that the alcohol wipe came in as a spatula to spread the

Xserve (Late 2006) Processor Heat Sink Replacement Instructions 9Rotate the top of the holder to the closed position.Engage the latch on the metal pr