Apple StyleWriter II Informações Técnicas descarregar pdf (Página 79)

The image is too light or too dark

If printing looks fuzzy because it’s too light or too dark, try the following:

m Check the nozzles in the print head. See “Printing the Test Page” later in

this chapter for instructions. If this doesn’t help, replace the ink cartridge.

See “Replacing the Ink Cartridge” in Chapter 4 for instructions.

m Make sure you’ve chosen the correct paper type in the Print dialog box.

m If you’re using plain paper, try flipping the stack of paper in the paper tray.

Most paper has one side that’s better for printing. If you’re using other

material, make sure you have it loaded in the correct orientation. See

“Loading the Sheet Feeder” in Chapter 2.

m Try using a different kind of paper.

m Try choosing Best quality in the Print dialog box.

Ink smears when rubbed

Don’t handle pages before the printer ejects them from the printer and

delivers them into the output tray. This allows all the time needed for the ink

to dry.

Pages leave the printer smeared, blurred, or smudged

The print head may be too close to the paper it’s printing on. Move the

internal paper selector to the envelope (=) position. See “Loading the Sheet

Feeder” in Chapter 2.

Printing appears on only part of the paper

Check the selections in the Page Setup dialog box. You may have set the page

size incorrectly.

Check the nozzles in the print head. See “Printing the Test Page” later in this

chapter for instructions. If this doesn’t help, replace the ink cartridge. See

“Replacing the Ink Cartridge” in Chapter 4 for instructions.

Troubleshooting

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 126 127

Sem comentários

Apple StyleWriter II Informações Técnicas Página 79