Apple StyleWriter II Informações Técnicas descarregar pdf (Página 81)

Printing the test page

To print the test page and clean the print head, follow these steps:

1 Turn off the printer.

2Make sure you’ve loaded U.S. letter-size or A4 paper into the printer.

3Press and hold down the power button until the power light starts to blink.

4 Release the power button and wait for the test page to print.

5Examine the nozzle test pattern for broken or missing diagonal lines.

The nozzle test pattern appears near the bottom of the test page:

6If you see broken or missing lines, try the following:

m Print the test page again until the problem clears up or the ink runs out

completely.

m Replace the ink cartridge.

The image prints wavy or distorted

Make sure that you are using recommended types of paper. Check the setting

of the internal paper selector above the ink cartridge. If the problem persists,

see the information about service and support that comes with the printer.

Stains appear on printed pages

Stains on the backs or tops of printed pages may mean that ink has spilled

inside the printer. If so, the ink can transfer to the rollers and from there to

the paper. Follow the instructions in “Cleaning the Inside of the Printer” in

Chapter 4.

Troubleshooting

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 126 127

Sem comentários

Apple StyleWriter II Informações Técnicas Página 81