Apple Processor Cage and Clips Guia de Instalação descarregar pdf (Página 38)

Figure 20 Installing the Cage Nut

8. Check both sides at the front and back of the rack to ensure all screws are installed properly.

Installing Enclosures

The storage system can contain the following types of drive and controller node enclosures: 2U

and 4U enclosures.

WARNING! The enclosure is heavy. Lifting, moving, or installing the enclosure requires two

people.

NOTE: When installing a 7400 (two-node) enclosure, two units of space must be reserved above

the enclosure for an upgrade to a four-node system. Labels are provided to secure on two filler

panels to reserve this space.

To install an enclosure on the rack:

1. Determine that the enclosure is oriented correctly by looking at the rear of the enclosure. Verify

the node numbering by reviewing the controller node label on both edges of the enclosure

slot.

Figure 21 Verify Controller Node Numbering

2. At the front of the enclosure, remove the yellow bezels on each side of the enclosure to expose

the mounting holes.

3. Slide the enclosure onto the rail shelves. Use both hands to handle the enclosure.

38 Installing Storage System Components into a Rack

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 116 117

Sem comentários

Apple Processor Cage and Clips Guia de Instalação Página 38