Apple Xserve G5 Guia do Utilizador Página 10

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 32
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 9
10 Chapter 1
Installing Your Xserve G5 PCI Hardware RAID Card
8
Locate the battery (at the lower-right side of the card) and carefully plug the battery
cable into its connector (beside the battery) on the card.
Note:
The battery cable’s connector only fits one way into the connector on the card.
9
Turn the card over and align the card's connector with the expansion slot in the riser
and carefully press it into the slot until the connector is inserted all the way into the
slot.
If the card doesn't line up with the “fence on the back panel, it is not installed
correctly. Press the card gently but firmly until the connector is fully inserted.
Don't rock the card from side to side; instead, press the card straight into the slot.
Battery
Plug the battery cable into this connector on the card
.
The plug will fit into the connector only one way.
Attach the PCI Hardware RAID Card to the PCI riser by pushing it in sideways.
Be sure to engage the card in the slot on the back panel.
PCI Hardware RAID Card
PCI riser
Vista de página 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comentários a estes Manuais

Sem comentários