Apple Xserve G5 Guia do Utilizador descarregar pdf (Página 7)

Installing Your Xserve G5 PCI

Hardware RAID Card

This chapter provides instructions for installing the RAID

card in your Xserve G5.

Before You Install

Important:

Before installing the card, be sure to back up all information on the

Xserve G5.

If the server’s BootROM needs to be updated, be sure to do so before installing the

card. To obtain the latest version of the BootROM, use Software Update or go to

www.apple.com/support/xserve.

When working on components within the server, always guard against static electricity.

Touch a metal surface to ground yourself before handling the RAID card and working

inside the server. When installing components, it's wise to wear a wrist grounding strap

that prevents static electricity from discharging into server components. Be sure to

connect the end of the strap to the system.

Installing the PCI Hardware RAID Card

Be sure to turn off the server before opening it and installing the RAID card.

To install the PCI Hardware RAID Card:

Shut down the server.

Be sure to alert users that the server will be unavailable for a period of time.

Disconnect all the cables from the back panel of the server.

Warning:

To avoid damaging its internal components or the components you want to

install, always turn off and then unplug your Xserve G5. Wait 5 to 10 minutes for it to

cool down. Do not attempt to install items inside it while it is plugged in.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Sem comentários

Apple Xserve G5 Guia do Utilizador Página 7