Apple 12/640PS Informações Técnicas Página 123

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 122
2 Repeat step 1 to install the second SIMM if necessary.
Yo u’ve now installed the expanded memory. You need only replace the side
cover to complete the installation.
3 Remove and discard the grounding wrist strap.
Replacing the side cover
After installing the memory, you then replace the side cover on the printer
and fasten it with the Phillips screws that you removed earlier.
To replace the cover on the printer, follow these steps.
1 Line up the front edge of the side cover with the front edge of the printer.
2Gently press the cover into the printer until the tabs snap into their receiving slots.
Check the Phillips screw holes on the back of the printer. The holes should
be unobstructed. (You shouldnt replace the Phillips screws until the side
cover is properly positioned.)
If the hole is obstructed, remove the side cover and try again. It may take a
few tries.
Place the cover back on the printer
and press firmly until it snaps into place.
123
Installing Options
Vista de página 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 353 354

Comentários a estes Manuais

Sem comentários