Apple 12/640PS Informações Técnicas descarregar pdf (Página 245)

m Check that the NetWare file server and the printer are on the same

segment of the network. If they are on different segments, you can

configure the printer by specifying the IPX network number and the

ethernet node address. See “Connecting to a Network Printer Manually” in

Appendix A.

m Check the printer’s frame type, printed on the startup page. Make sure it

matches your computer’s frame type or your NetWare file server’s frame

type. If the frame type is different, use the Connect to the Printer Manually

command to change the frame type to the desired value. See “Connecting

to a Network Printer Manually” in Appendix A for more information.

The printer is properly connected and configured, but printing is garbled or displays

unwanted characters.

If your printer is connected to the server through a parallel port connection,

display the PostScript Options dialog box and make sure that Protocol

Options is set to Default. This dialog box is available through the Setup

command in your application’s File menu. See “Additional Printer Options” in

Chapter 7 for more information on protocol options.

My text documents print fine, but I have problems with spreadsheets and graphics.

Try removing the banner page, auto-end capping, tabs expansion, and form

feeds. Use the DOS

CAPTURE command to set the following printing

options:

/nb /na /nff /nt /ti=30

245

Fixing Other Problems

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 353 354

Sem comentários

Apple 12/640PS Informações Técnicas Página 245