Apple 12/640PS Informações Técnicas descarregar pdf (Página 238)

238

Chapter 12

No LaserWriter 8 icon appears in the Chooser.

Make sure that the LaserWriter 8 driver is properly installed. The printer

driver may be on your startup disk but may have been moved to the wrong

location. If necessary, drag the driver into the Extensions folder inside the

System Folder.

Also make sure that you have only one System Folder on your startup disk.

Refer to the information that came with your computer.

The printer is not listed in the Chooser.

If you’ve selected the LaserWriter 8 icon but your LaserWriter 12/640 PS is

not named in the list of printers, one of the following may be the cause.

m The printer has been turned off. Make sure it is plugged in and turned on,

and wait for the Ready light to turn on.

m The communications settings are not set correctly. See “Adjusting

Communication Settings” in Chapter 1 and Appendix A. See also

Appendix D for a list of acceptable values. To reset the communications

settings to their factory default values, set the communication switch to the

Reset (out) position. Turn the printer off and back on again. Set the

communication switch to the Normal (in) position.

m Someone may have renamed the printer. Check the startup page to see if

the name has changed.

m If you are using an AppleTalk network that contains zones, you may not

have selected the correct zone for the printer.

m There’s a problem in the network cable system somewhere between your

computer and the printer you want to use. Make sure that all the cables are

properly connected. If you still can’t resolve the problem, the printer’s

electronics or the network connector boxes may not be functioning

properly. Call an Apple-authorized dealer.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 353 354

Sem comentários

Apple 12/640PS Informações Técnicas Página 238