Apple 12/640PS Informações Técnicas descarregar pdf (Página 247)

The printer administrator forgot the password for the TCP/IP Printer Configuration Utility.

See the service information that came with your printer to learn how to get in

touch with Apple.

Sometimes printing the first page takes longer than I expect.

The LaserWriter 12/640 PS automatically goes into an energy-saving mode

after it’s been idle for a while. When you print while it’s in this mode, the

printer takes about a minute to warm up before it can print the first page.

The RARP server is not responding.

If you chose to use a RARP server to assign the printer’s IP address while

setting up the printer, but the server is not responding, follow these steps

in order:

m Ve r i fy that the

rarpd daemon is running on the server. On many

UNIX systems, you can verify this by typing

ps -e or ps -ax at the

UNIX prompt on the server. If the daemon isn’t running, type

/usr/etc/rarpd -a to start the daemon.

m Make sure that the server running RARP is on the same subnet as

the printer.

m Check the

/etc/ethers file to verify that it contains the correct

Ethernet address and hostname.

m Check the

/etc/hosts file to verify that it contains a valid IP address

and the same hostname as in the

/etc/ethers file.

m Tur n the printer off and then back on.

The BOOTP server is not responding.

If you chose to use a BOOTP server to assign the printer’s IP address while

setting up the printer, but the server is not responding, follow these steps

in order:

m Make sure that the server running BOOTP is on the same subnet as the

printer or that BOOTP is properly configured to run on multiple subnets.

247

Fixing Other Problems

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 353 354

Sem comentários

Apple 12/640PS Informações Técnicas Página 247